Manifolds for Flow Injection Analysis

The heart of a flow injection analyzer is the transport system that brings together the carrier stream, the sample, and any reagents that react with the sample. Each reagent stream is considered a separate channel, and all channels must merge before the carrier stream reaches the detector. The complete transport system is called a manifold.

The simplest manifold includes only a single channel, the basic outline of which is illustrated here. This type of manifold is commonly used for direct analyses that do not require a chemical reaction. In this case the carrier stream serves only as a means for rapidly and reproducibly transporting the sample to the detector. For example, this manifold design has been used for sample introduction in atomic absorption spectroscopy, achieving sampling rates as high as 700 samples/h. A single-channel manifold also is used for determining a sample’s pH or determining the concentration of metal ions using an ion selective electrode. We can also use the single-channel manifold in Figure 13.25 for systems in which we monitor the product of a chemical reaction between the sample and a reactant. In this case the carrier stream both transports the sample to the detector and reacts with the sample.

Figure13.25

Most flow injection analyses that include a chemical reaction use a manifold with two or more channels. Including additional channels provides more control over the mixing of reagents and the interaction between the reagents and the sample. Two configurations are possible for a dual-channel system are illustrated here: (a) injection of the sample after the mixing of the reagent streams; and (b) injection of the sample into one reagent stream prior to mixing with the second reagent stream. The choice of manifold depends on the chemistry of the reactions between the analyte and the reagents.

Figure13.26

More complex manifolds involving three or more channels are common, but the possible combination of designs is too numerous to discuss. One example of a four-channel manifold is shown here.

Figure13.27

Twitter del.icio.us Digg Facebook linked-in Yahoo Buzz StumbleUpon
This entry was posted in Illustration and tagged , , . Bookmark the permalink.

Leave a Reply

Your email address will not be published. Required fields are marked *